2018 Tundra does not lock doors after remote start.

Question

2018 Tundra Evo One installed and programmed, remote starts works with 3x lock button pressings , doors unlocks before it cranks but it does not lock back up after vehicle starts even thou option D5 is set..

firmware 79.45

options C1 D2 D5 setting protection Y

Evo One remote start firmware version 1.2.4

options 2.4, 38.2

thanks in advance for the help.

Dan

Answer 1

Turn off D2, it is not needed since a disarm wire is connected.

 

Double check the doorlock data connection. This is where the locks are controlled.

Comments

Yes try it and let me know.

---

Removed Orange A6 and the truck does not unlock anymore when starting. 

My alarm did go off with one of 3 starts

I will run with it for a few days and report back.

 

Thanks

 

---

Your alarm will always go off without that wire connected.

If you meter the orange wire does it always rest at ground?

---

They way I finally fixed mine was just turning on option 6.3 on the Evo-One Options, it's been working as suppossed after doing that.

---

Update, changed 6.3 to 6.1 and reflashed unit to latest software 79.49 and now truck locks after start, thanks.