Cant program revo-1 rf to evo-one

Question

So im trying to get the revo-1 one button rf remotes to program  and i cant get a response from the Evo-one. i set option fortin2 in rs side, programmed evo to vehicle,

i turn ign on hold valet switch get the blinking red light, press 5x hit the brake and press button on remote but dont get any confirmation, red light does blink once when i step on brake tho. the antenna is plugged into blue rf port

and other end to antenna any ideas? On a side not I wires using this diagram https://fortin.ca/download/29781/evo-one_thar-one-toy1_iq-ic-4runner_c20150317.pdf I cut the auto light wire and connected yellow red to one end yellow green to the other now under normal operation the auto lights never shut off

Answer 1

Did you figure it out ? I have the same issue. what was it?

Answer 2

I'm having the same issue, everything goes smoothly up until trying to register the remotes.

Comments

I lowered the firmware on the remote start side to 1.16, per a conversation with crimestopper and it worked. Only thing is the oem key fob bdoesnt work in remote start mode. Not sure how to fix that yet.

---

I don't think the OEM fob is supposed to work while the car is running in remote start.  Pretty sure you have to use the new fob, except yours doesn't have any lock/unlock buttons.