evo one programming 2010 mercury red light don't flash 10 times

Question

i installed evo one as instructed by guide 22301 and all wires confirmed to be as on the manual, during programming the key the light dont flash 10 times

I uploaded newer version and the recommended version by flashlink and didn't work .

additional question, can i start it through oem remote 3X lock or not .

thanks

Answer 1

If 2 key programming is failing, I would highly suggest following the 1-key Drcryptor programming (page 7).

In order to be able to offer 3xlock, the module needs to be able to monitor the OEM remote on CAN-BUS. There is no CAN-BUS wiring in this vehicle, 3xlock is not supported. An RF-KIT is required.