2013 Tundra Evo One and T-Harness, Crank but won't start

Question

Got everything wired up according to the wiring diagram in the instructions. I press lock 3 times and see the blue LEDs on the EVO flash. Parking lights turn on and truck cranks. But not able to start. Stops and tries one more time cranks but no start. Only thing I can think of is maybe the Immobilizer wire going to the OBD. I have it on Pin 7 brown wire (looks more tan colored) which is what instructions showed. There is a more brown looking wire on Pin 5. Any idea what's wrong?

Answer 1

When you programmed the Evo One to the vehicle, did it flash the BLUE and RED led's 10x like it says in step 5 in the guide??

 

Also did you do the SIL DATA  wire cut and connections behind the glove box??