Hummer Passlock Reference Incorrect

Question

Good day,

I purchased both the 2007 as well as the 2008 Hummer wiring to check over on the bypass for the passlock system.

However the blue/white wire is for the key in ignition dong.

I have an intermittent non start issue so i wish to bypass the Passlock system but your wiring diagram appears to be wrong.  

Please help

Answer 1

Our units are not designed to replace/fix/permanently bypass oem passlock systems, and require a 100%working passlock system to properly program itself.

 

There were 3 different Hummer models available from 2007 to 2008, please specify what model/year you are working on.

 

Intermittent no-start passlock issues can only be fixed properly by replacing the defective module after an electrician has identified which module is causing the issue. (passlock module at the steering column, or the BCM, or wiring etc...)