2011 expedition guide

Question

I need the installation guide for a 2011 ford expedition king ranch.  I just want to installt the remote start feature.

Answer 1

Hi,

With the service number you provided, you can get the installation guide here: http://ca.fortin.ca/en/vehicles/ford/expedition/2011/ under the Evo-All product,

There are 2 possible types of connections in your vehicle depending on if you have a 40bit or 80bit key.

To determine if your vehicle is 40 or 80 bit system please perform the following test

You need to go to pin one of the immobilizer transponder connector and test it as follows using a volt meter, set on DC volts.
80-bit Key
NO Key IN : 0V
Key IN & Ign OFF : +12V
Key IN & Ign ON : +12V

40-bit Key
NO Key IN : 0V
Key IN & Ign OFF : 0V
Key IN & Ign ON : +12V

in both cases you will need a separate remote starter to control the evo-all for remote starting.