evo one doesnt seem to be putting out voltage when remote starting

Question

I followed all the instructions provided in the service manual and the blue led flashes when I hit the lock button on the factory fob and when I hit lock 3x the red and amber led turn on but none of the lights on the dash come on and the car doesnt crank. Also a side point I noticed that the tech sheets from fortin and the wire color website dont match up all the same wires.

Answer 1

What is the vehicle you are working on and what is the service number on your module ?

Comments

2012 acura tl push to start and ill get the service number soon

Answer 2

First, make sure the options for 3x lock are enabled (which yours seem be from the description given). All this info can be found here : http://ca.wirecolor.com/en/qa/45303/faq-how-to-program-3x-lock-start-on-the-evo-one . With the 12-digit service number, we can check to see all options are properly enabled.

 

Also, on the back of the unit their is a yellow wire loop. If your vehicle is automatic transmission, you need to cut that loop.

 

Also a side point I noticed that the tech sheets from fortin and the wire color website dont match up all the same wires.

Not all wires found on wirecolor will be needed for a remote starter install.

Comments

The wire is cut for automatic transmission

---

We need the Service number on the back of the Evo One Unit.