I can fix evo-all 2007 to IG Push start for toyota land cruiser prado 2022

Question

Good day , I have Evo ALL (PATENTS PENDING US: 2007-0228827- A1)

But without plugs. My question. I can fix this device to my car for Ignition start

My car is toyota land cruiser prado 150 model 2022. Push start..

If I can fix which ( Fortin THAR-toyt#. T-Harness for Select 2022 Push-to-Start toyota Vehicles

Thanks

Basel

Answer 1

Hello,

Yes the evo-all can work for remote start on that vehicle as long as it is hardware 7 module with a qr code. You would also need a remote starter to go along with it as the evo-all does not support stand alone on this vehicle.

https://cdn02.fortin.ca/download/113831/EVO-ALL_IG_REG_BI_TOY_LAND-CRUISER_PTS_2022_A_113831.pdf
 

Here are the supported solutions: https://fortin.ca/en/vehicles/toyota/land-cruiser/2022-push-to-start/compatibility/

 

T-harness is for evo-one only.

Best regards.

Comments

Thank you for answer & support

Ok but which canaction cable use EVO-ALL_IG_TSA_BI_TOY6

I can use this

---

No, the THAR-TOY6 is not compatible with that vehicle. There is no T-harness for the EVO-ALL for this vehicle. As mentionned, the EVO-ALL only does the bypass , it will require a third party remote starter.

The THAR-ONE-TOY16 is available but requires the EVO-ONE

https://fortin.ca/en/vehicles/toyota/land-cruiser/2022-push-to-start/compatibility/

---

THAR-TOY6 works on vehicles listed here:

https://fortin.ca/en/products/vehicles/vehicle-specific-t-harness/thar-toy6/