2018 Ford F150 STD Key with Keyless not working

Question

Hey Guys,

 

I'm trying to install an EVO-FORT3 on my 2018 Ford F150. When I wire it up using the T harness the key programs as it should but when I try to start it with the OEM fob using the three lock method nothing happens. The box sees my lock and unlock commands because I see the blue light flash, but it just doesn't start. When I ground the manual remote start trigger (yellow/black wire) from the EVO-ALL the truck starts as it should.

I don't have a cable to check the programming as it was programmed by a dealer. Does this sound like a programming issue? The truck starts when manually triggered, just not with the remote as it should.

Answer 1

Apparently the D1.10 option wasn't enabled when this was programmed. So it was a dealer programming mistake.

Answer 2

Prob. doesn't have the stand alone option enabled. Need the Flashlink to check, or give these guys the service code and they can look on their end.

Comments

Just looked it up, Standalone is enabled but 3x lock is disabled.