2008 aveo ls evo-one can't program

Question

HI, CAN ANY ONE HELP ME ABOUT  EVO-ONE FOR 2008 AVEO LS,CONNECTION EVERYTHING IS OK BUT WHEN I DO THE PROGRAMMING IT WONT PROGRAM,RED LED DOESN'T FLASH,THE MANUAL SAID CONNECT 6 PIN THEN STOP AT RED THEN CONNECT THE REST OF THE WIRING,THEN PUSH RELEASE 1X THEN 2X PUSH RELEASE THEN TURN ON THE KEY TO RUN POSITION,BUT NOTHING HAPPEN,RED LED JUST FLASHING EVERY SECOND,NOT PROGRAMMING,IT LOOKS LIKE SOME WIRING IS MISSING FROM THE TRANSPONDER MODULE AT THE KEY BARREL,CAN ANY ONE HELP?

THANKS...

Answer 1

The connections shown in the install guide are not at the key barrel, they are at the BCM which is right next to the steering column.

Comments

HI,

THANKS FOR THE ANSWER, CAN YOU PLEASE SHOW ME THE PICTURE OF THAT BCM NEXT TO THE STEERING COLUM..

 

THANKS

---

HELLO, STILL NO LUCK TO CHEV AVEO 2008, ALL WIRING IS OK AND ALL THE PROGRAMMING SEQUENCE IS OK BUT STILL DOESN'T PROGRAM,WHEN I TURN ON TO RUN POSITION THE RED AND YELLOW ON, NO RED FLASHING,CAN ANY ONE PLEASE HELP,ITS EMBARASSING TO THE CUSTOMER,IVE BEEN TRYING EVERYTHING AND STILL NO LUCK,ITS ONLY 3 WIRE ACCORDING TO THE INSTALL GUIDE AND STILL NOT WORKING...PLEASE HELP....