Questions & Answers

2015 Dodge Charger will not remote start

0 votes

Hello. Referring to this guide I have set up my EVO-ALL

Here is what I have done:
- Flashed the unit with the latest firmware
- Selected my vehicle in the flashlink software
- Connected the T harness and ignition wires

When programming:
- Let go of programming button on BLUE
- Press programming button once to turn off BLUE
- Turn ignition to RUN
Now the BLUE led starts flashing. According to the guide, the RED led should also be flashing, which it is not. That leads me to believe that CAN2 is not being detected, is that correct? How do I fix this issue?

asked Nov 18, 2023 in Dodge by Dallas Fischer (130 points)

1 Answer

0 votes
If RED is on solid, then yes, there is connection issue on the CAN2 line.
If RED is simply OFF while blue is flashing, then you are fine.

Note that after releasing on blue, you must turn ignition on and then press the button on the EVO 1x. Do not press the button on the evo prior to turning on ignition.
answered Nov 18, 2023 by Robert T (300,020 points)
...